Technical Specifications - Tannoy revolution Owner's Manual

TECHNICAL SPECIFICATIONS

PERFORMANCE
Recommended amplifier power
(Watts RMS)
Continuous power handling
(Watts Peak RMS)
Peak power handling (Watts)
Sensitivity (2.83 Volts @ 1m)
Nominal Impedance (Ohms)
Frequency response (-6dB)
Dispersion (degrees conical)
DRIVE UNITS
Dual Concentric™ high frequency
Dual Concentric™ low frequency
Bass Driver
CROSSOVER
Crossover frequency
Crossover Type
CONSTRUCTION
Enclosure type
Volume
Dimensions (excl grille) H x W x D
Dimensions (inc plinth) H x W x D
Weight
Finish
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
Revolution DC6 Revolution DC6 T
20 – 150 20 – 175
75 87
300 350
88dB 89dB
8 8
46Hz – 35kHz 34Hz – 35kHz
90 90
25mm (1") Titanium dome 25mm (1") Titanium dome
TM
with Tulip WaveGuide with Tulip WaveGuide
150mm (6") treated paper 150mm (6") treated paper
pulp cone with pulp cone with
rubber surround. rubber surround.
44mm (1.75") edge 44mm (1.75") edge
wound voice coil wound voice coil
- 150mm (6") treated paper
- pulp cone with
- rubber surround.
- 44mm (1.75")
- wound voice coil
1.8kHz 1.7kHz
Passive low loss Passive low loss
2nd order LF, 1st order HF 2nd order LF, 1st order HF
Rear ported Rear ported
10.8L (0.381 cu. ft.) 29.6L (1.045 cu. ft.)
365 x 202 x 253mm 950 x 202 x 253mm
(14.37 x 7.95 x 9.98") (37.40 x 7.95 x 9.98")
- 950 x 256 x 292mm
(37.40 x 10.09 x 11.50")
6.8kg (15.0lbs) 15.1kg (33.3lbs)
Espresso Espresso
TM
REVOLUTION MANUAL
_011