Specifications; Product View And Parts; General Information; Important Safety - Talon AC211114 User Manual

SPECIFICATIONS

Model No. . . . . . . . . . . . . . . .AC211114 . . . . . . .AC211114A . . . . . .AC21111N4 . . . . . .AC211116 . . . . . . .AC211116A
Input . . . . . . . . . . . . . . . . . . . .1800W . . . . . . . . . .2000W . . . . . . . . . .2000W . . . . . . . . . .1800W . . . . . . . . . .2000W
No Load Speed . . . . . . . . . . .7,000/min . . . . . . . .7,000/min . . . . . . . .7,000/min . . . . . . . .7,000/min . . . . . . . .7,000/min
Cutting Speed . . . . . . . . . . . . .10 m/sec . . . . . . . .10 m/sec . . . . . . . .10 m/sec . . . . . . . . .10 m/sec . . . . . . . . .10 m/sec
Cutting Length . . . . . . . . . . . .14" (35cm) . . . . . . .14" (35cm) . . . . . . .14" (35cm) . . . . . . .16" (40cm) . . . . . . .16" (40cm)
Tension Adjustment . . . . . . . .Tool. . . . . . . . . . . . . .Tool . . . . . . . . . . . . .Toolless . . . . . . . . . .Toolless . . . . . . . . . .Toolless
Chain Pitch . . . . . . . . . . . . . . .3/8" . . . . . . . . . . . . .3/8" . . . . . . . . . . . .3/8" . . . . . . . . . . . . .3/8" . . . . . . . . . . . . .3/8"
Chain Guage . . . . . . . . . . . . .1.3mm . . . . . . . . . .1.3mm . . . . . . . . . .1.3mm . . . . . . . . . .1.3mm . . . . . . . . . .1.3mm
Net Weight . . . . . . . . . . . . . . .4.3kg . . . . . . . . . . .4.3kg . . . . . . . . . . .4.3kg . . . . . . . . . . . .4.4kg . . . . . . . . . . . .4.4kg
Oil Capacity . . . . . . . . . . . . . .200ml . . . . . . . . . . .200ml . . . . . . . . . . .200ml . . . . . . . . . . .200ml . . . . . . . . . . .200ml

IMPORTANT SAFETY

•

HOW TO READ SYMBOLS AND COLORS

(FIG. 1)
WARNING: RED Used to warn that an
unsafe procedure should not be performed.
GREEN RECOMMENDED
Recommended cutting procedure.
WARNING
1
2
1. Beware of kick back.
2. Do not attempt to hold saw
with one hand.
4
3
3. Avoid bar nose contact.
RECOMMENDED
Fig. 1
4. Hold Saw properly with both
hands.
• DANGER! BEWARE OF KICKBACK!
WARNING: Kickback can lead to dangerous
loss of control of the chain saw and result in
serious or fatal injury to the saw operator or to
anyone standing close by. Always be alert
because rotational kickback and pinch kickback
are major chain saw operational dangers and
the leading cause of most accidents.
A
B
A
A
Fig. 2A
BEWARE OF: ROTATIONAL KICKBACK
(Fig. 2A)
A = Kickback path
B = Kickback reaction zone
A
B
B
C
Fig. 2B
THE PUSH (PINCH KICKBACK) AND PULL REAC-
TIONS (Fig. 2B)
A = Pull
B = Solid objects
C = Push
KICKBACK may occur when the NOSE or TIP of the guide
bar touches an object, or when wood closes in and pinch-
es the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back toward
the operator.
PINCHING the saw chain along the BOTTOM of the guide
bar may PULL the saw forward, away from the operator.
PINCHING the saw chain along the TOP of the guide bar
may PUSH the guide bar rapidly back toward the operator.
Any of these reactions may cause you to lose control of
the saw, which could result in serious personal injury.
4
AU
15
12
3
16
17
1. Rear Handle
2. Oil Tank Cap
3. Trigger
4. Sprocket cover
5A. Bar Retaining Nuts
(AC211114/211114A)
5B. Chain Tensioning Ring
(AC211116/AC211116A/
AC21111N4)
•

SAFETY FEATURES

Numbers preceding the descriptions correspond with the numbers above to help you locate the safety feature.
3 TRIGGER START / STOP SWITCH stops saw motor when released.
8 CHAIN BRAKE LEVER / HAND GUARD activates the chain brake and protects the operator's left hand in the
event it slips off the front handle while saw is running.
6 ELECTRIC MOTOR is double insulated for added safety.
9 LOCK / OFF BUTTON prevents accidental starting of the saw motor. The trigger cannot be squeezed unless
lock/off button is pushed in.
12 LOW-KICKBACK CHAIN helps significantly reduce kickback, or the intensity of kickback, due to specially designed
depth gauges and Guard links.
18 CHAIN CATCHER reduces the danger of injury in the event saw chain breaks or derails during operation. The
catcher is designed to intercept a whipping chain.

GENERAL INFORMATION

8
10
6
2
13
18
5A
4
6. Electric Motor
7. Electric Cord
8. Chain Brake Lever / Hand Guard
9. Trigger Lock / Button
10. Front Handle
11. Guide Bar
12. Saw Chain
13. Log Spikes
14. Rear hand Guard
5
AU
9
1
14
7
11
5B
15. Guide Bar Nose
16. Oil Tank Inspection Window
17. Cord Retainer
18. Chain Catcher