Advertisement

USER MANUAL
Petrol Chain Saw
SAFETY • OPERATION • MAINTENANCE
This product has been tested at a computed kickback angle (CKA) of no greater than max. 45 degrees.
WARNING • PLEASE READ
Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety, please read and follow
the safety precautions in this manual before attempting to operate your chain saw. Improper use can cause serious
injury.
MODEL NO. AC311014
9096-311001
P E T R O L C H A I N S A W W A R R A N T Y
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the "Company") to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and subject
to the conditions stated herein, repair or replace without charge this product or any component part, which
upon examination by an Authorised Service Agent or by the Company is found to be defective.
Wa r r a n t y c o n d i t i o n s
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty Card.
The period of the warranty begins from the original date of purchase, notwithstanding any subsequent
repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Comapany's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Compnay or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to prevent
damage.
Warranty exclusions
Normal wear parts or components are subject to seperate terms as follows: Normal wear parts,
components or service required when performing normal and regular maintenance of this prod-
uct are not covered by warranty unless it is found to be defective by an Authorised Service
Agent or by the Company. Normal wear parts include, but are not limited to:
Chains.
Chain Bar.
Spark Plugs.
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser.
Carburetor Adjustments.
Filters.
Lubricants.
Engine Tune-ups.
1
AU

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC311014 and is the answer not in the manual?

Questions and answers

Summary of Contents for Talon AC311014

  • Page 1 Trade Practices Act 1974 or by any legislation of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520 939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from USER MANUAL the date of original purchase.
  • Page 2 GENERAL SAFETY RULES Meaning of symbols marked on the product WARNING KICKBACK SAFETY PRECAUTIONS Beware of kickback. Read the user manual before using the machine Wear safety boots to protect agains electric shock Kickback may occur when the nose or tip of the guide bar Do not attempt to hold saw with one hand.
  • Page 3 Model No........
  • Page 4 • CHAIN BRAKE MECHANICAL TEST • MIXING FUEL WARNING: Always wear heavy duty gloves when handling saw chain or making saw Your chain saw is equipped with a Chain brake that Mix fuel with 2 cycle oil in an approved container. Use mix- chain adjustments.
  • Page 5 WARNING: Do not cut down a tree during high or changing winds or if there is a danger to property. Consult a tree professional. Do not cut down a tree if there is a danger of striking utility wires; notify the utility company before making any cuts.
  • Page 6 Log supported on both ends: First, overbuck 1/3 Remove the fuel tank cap. MAINTENANCE EACH HOURS OF diameter of log to avoid splintering. Second, under- CHECKLIST USE OPERATION Bend a piece of soft wire to form a hook at the end. buck to meet first cut and avoid pinching (Fig.
  • Page 7 Reinstall a new spark plug. Fill fuel tank with proper fuel / oil mixture. See FUEL GUIDE BAR MAINTENANCE: GUIDE BAR - The bar should be reversed every 8 work- AND LUBRICATION Section. ing hours to ensure uniform wear. Most guide bar problems can be prevented merely by keeping the chain saw well maintained.
  • Page 8 TROUBLE SHOOTING THE ENGINE PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Unit won’t start or starts but will not run. Incorrect starting procedures. Follow instructions in the User Manual. Incorrect carburetor mixture adjustment Have carburetor adjusted by an Authorized setting. Service Center. Fouled spark plug Clean / gap or replace plug.

Table of Contents

Save PDF