Windshield Wipers; Daytime Running Lights - Subaru Tribeca Quick Reference Manual

2012
Hide thumbs Also See for Tribeca:
Table of Contents

Advertisement

Windshield Wipers

To turn the wipers on, press the
wiper control lever down one level
for intermittent, two levels for low, or
three levels for high speed. Return the
wipers. For a single wipe/mist, pull the
lever toward you. To spray washer fluid
spray, press the washer button at the
end of the wiper control lever.
To operate the rear wiper, turn the
knob on the end of the control lever
forward to intermittent, continuous,
or wash position. Turn the end of the
lever backward for wash operation
when the rear wiper is not in use.
When the automatic transmission is
placed in reverse, the rear wiper will
operate continuously even when the
OFF
1
INT.
LOW
HIGH

Daytime Running Lights

Daytime running lights are standard
on your vehicle. A reduced brightness
high beam will be automatically turned
on by the daytime running light system
when the engine has started and the
parking brake is fully released and the
position. You must always switch on
your headlights when it's dark outside
by turning the light switch to the
Windshield Wiper De-Icer
Remove the
snow from your
windshield
before starting
this system.
To begin de-icing, push the button (the
light will illuminate while in operation).
The de-icing system automatically
shuts off after about 15 minutes. If
more time is required, push the button
to reactivate the de-icer.
11
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tribeca 2012

Table of Contents