Cruise Control - Subaru Tribeca Quick Reference Manual

Cruise Control

Resume
Push the control lever
Set
located on the end of the control
light on the instrument panel will
turn on. Press the accelerator
pedal until your vehicle reaches
the desired speed. Push the
accelerator pedal. Your vehicle will
maintain the desired speed.
Increase speed
Push the control lever up to the
your vehicle reaches the desired
speed, and release. To increase
speed using the accelerator pedal,
press the pedal until you reach the
desired speed. Push the control
position to set the speed.
Temporary Cancel
There are two ways to temporarily cancel
cruise control: depress the brake pedal or
Shut Off
To deactivate cruise control, push the
the vehicle is stopped, turn the
Decrease speed
to the desired speed, and release. To
decrease the speed using the brake
pedal, press the pedal to release
cruise control temporarily. When the
speed decreases to the desired rate,
push the control lever down to the
17 17