Table of Contents
Advertisement
CONTROLS
Daytime Running Lights
The daytime running lights automatically turn on when the engine is running, the parking
brake is released, the select lever is out of the "P" position, and the light switch is set to
Off, "AUTO", or "
". Always turn on the headlights when it's dark outside by rotating
the dial to the "
" or "AUTO" position.
TURN SIGNALS
Push fully up for the right turn signal and fully
down for left turn signal. Your Subaru also has
a one-touch lane changer feature: push slightly
up and release to signal a right lane change or
push slightly down and release to signal a left
lane change.
WINDSHIELD WIPERS
To turn on the wipers, press the wiper control
lever down one position for intermittent, two
positions for low speed, or three positions for
high speed. When the lever is in the
intermittent position, rotate the dial to adjust
the operating interval of the wipers. To turn the
wipers off, return the lever to the "OFF"
position. For a single wipe, move the lever up
from the "OFF" position.
Pull the lever toward you to wash the windshield. The washer will spray and the wipers will
operate while you pull the lever.
33
Advertisement
Table of Contents
