Subscribe to Our Youtube Channel
Related Manuals for ATCOM AXE800P
Summary of Contents for ATCOM AXE800P
- Page 1 ATCOM ATCOM Analog Analog Card Card AXE800P AXE800P ATCOM ATCOM ® ® ® ® Analog Analog Card Card AXE800P AXE800P Product Product Guide Guide Product Product Guide Guide Version: 1.1...
-
Page 2: Table Of Contents
The Installation of AXE800P with Debian 5.0.3 Content C C C C ONTACT ONTACT ONTACT ONTACT ATCOM ATCOM ATCOM ATCOM......................................................2 2 2 2 ......................................................C C C C HAPTER HAPTER HAPTER HAPTER 1 1 1 1 THE THE INTRODUCTION... -
Page 3: C C C C Ontact
ATCOM The Introduction of ATCOM Founded in 1998, ATCOM technology has been always endeavoring in the R&D and manufacturing of the internet communication terminals. The product line of ATCOM includes IP Phone, USB Phone, IP PBX, VoIP gateway and Asterisk Card. -
Page 4: C C C C Hapter
AXE800P Asterisk card is the telephony PCI-E card that supports up to eight FXO/FXS ports. Using AXE800P analog card, open source Asterisk PBX and stand alone PC, users can create their SOHO telephony solution which include all the sophisticated features of traditional PBX, and extend features such as voicemail in IP PBX. -
Page 5: C C C C Hapter
If you want to use FXS port with AX800P, you have to provide 12V power for the card. If you want to use any module with AXE800P, you have to provide 12V power for the card. Please download the dahdi-linux for the card in atcom website. - Page 6 Figure 2: AX-210S Figure 3: AX-210XS Figure 4: AX-210X Figure 5: SP400 www.atcom.cn...
-
Page 7: C C C C Hapter
Test Environment: asterisk-1.6.2.6 dahdi-linux-complete-2.4.2.1+2.4.1 Debian 5.0.3 AXE800P+4AX-210X After inserting the card into your PCI slot and boot your server, please use the “lspci -vv” command to check the PCI bus compatibility. The correct output will like the following: ---------------------------------------------------------------------------------------------------------------------- 05:04.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface... - Page 8 Install asterisk 1) debian:/usr/src# tar -xvzf asterisk-1.6.2.6.tar.gz 2) debian:/usr/src# cd asterisk-1.6.2.6 3) debian:/usr/src/asterisk-1.6.2.6# ./configure 4) debian:/usr/src/asterisk-1.6.2.6# make 5) debian:/usr/src/asterisk-1.6.2.6# make install 6) debian:/usr/src/asterisk-1.6.2.6# make samples www.atcom.cn...
-
Page 9: C C C C Hapter
..........fxsks=7 echocanceller=mg2,7 fxsks=8 echocanceller=mg2,8 # Global data loadzone = us (According to your country) defaultzone = us (According to your country) ---------------------------------------------------------------------------------------------------------------- www.atcom.cn... - Page 10 ......;;; line="7 WCTDM/16/6 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 7 callerid= group= context=default ;;; line="8 WCTDM/16/7 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 8 callerid= group= context=default www.atcom.cn...
-
Page 11: Configuration
Blocked State pseudo default default In Service from-pstn default In Service from-pstn default In Service ..........from-pstn default In Service from-pstn default In Service www.atcom.cn... - Page 12 C C C C hapter hapter hapter 5 5 5 5 Reference Reference hapter Reference Reference http://www.asteriskguru.com/ http://www.asterisk.org/downloads http://www.openippbx.org/index.php?title=Main_Page http://www.atcom.cn/ www.atcom.cn...
Need help?
Do you have a question about the AXE800P and is the answer not in the manual?
Questions and answers