Snom Phones Frequently Asked Questions Manual page 7

timer in seconds. 0 disables the session
timer, 3600 is a reasonable value.
dirty_host_ttl
Valid values: Integer values, e.g. <60>,
<120>.
Default: 0
Description: Time in seconds until the
phone waits before it repeats a non
answered request again.
max_forwards
Valid values: Integer values, e.g. <40>,
<60>.
Default: 70
Description: The maximum number of
hops allowed for an SIP request/
response.
enum_suffi x
Valid values: e.g. <e164.arpa>
Default: e164.arpa
Description: Route domain for ENUM,
see FAQ "ENUM on snom phones"
tcp_threshold
Valid values: <auto>, <tcp>, <udp>
Default: auto
Description:
SIP messages either to TCP, UDP or
automatic.
trace
Valid values: <true>, <false>
Default: true
Description: Enable tracing output of the
current protocol stack.
logon_wizard
Valid values: <true>, <false>
Default: false
Description: Logon wizard and mobility
features available in snom key menu.
snom phones confi guration
[ F
R E Q U E N T L Y
Set transport layer
A Q
S K E D U E S T I O N
user_phone
Valid values: <true>, <false>
Default: true
Description: Use user=phone in SIP
signalling.
use_mapped
Valid values: <true>, <false>
Default: true
Description: Use mapped address.
publish_presence
Valid values: <true>, <false>
Default: false
Description: Publish presence
information on <true>.
refer_policy
Valid values: <auto>, <refer>, <bye>
Default: Auto
Description: Choose between REFER and
BYE/Also method for initiating a transfer.
Auto makes
depending on the capabilities indicated
by the other party.
refer_brackets
Valid values: <true>, <false>
for
Default: false
Description: In case you want to have
your REFER framed with brackets set it
to <true>.
user_dp_str[1-7]
Valid values: dialplan regular expression,
see snom4S proxy manual
Default: blank
Description: up to 7 dialplan lines
sip_moh_server
Valid values: e.g. <sip:mh@snom.de>,
<mh>, <192.168.0.40>
Default: blank
Description: SIP Address of music on
]
an automatic selection
7