Snom Phones Frequently Asked Questions Manual page 10

phone to the PBX if it is set and the "Xfer"
key is pressed on the phone for a blind
transfer.
key_seq_transfer_consultation
Valid values: e.g. <*6>
Default: blank
Description: Key code that is sent by
the phone to the PBX if it is set and the
"Xfer" key is pressed on the phone for a
consultation transfer. The phone needs
to have 2 active calls in order to use this
feature.
key_seq_divert
Valid values: For example <*3>
Default: blank
Description: Key code that is sent by the
phone to the PBX if it is set and redirection
is active with a redirection number.
key_seq_conf_on
Valid values: For example <*3>
Default: blank
Description: Key code that is sent by
the phone to the PBX if it is set and the
"Cnf.On" key is pressed on the phone.
key_seq_conf_off
Valid values: e.g. <*30>
Default: blank
Description: Key code that is sent by
the phone to the PBX if its set and the
"Cnf.Off" key is pressed on the phone.
key_seq_pickup
Valid values: e.g. <#11>
Default: blank
Description: Key code that is sent by the
phone to the PBX to pick up an alerting
call. This is activated by pressing the
'pickup' key when the key_seq_pickup is
set.
10
[ F A
R E Q U E N T L Y
Q
S K E D U E S T I O N
key_seq_end
Valid values: e.g. <#>
Default: blank
Description: The end symbol that is
automatically appended to the above
key codes before they are sent to the
PBX. The end symbol marks the end
of a key code sequence.
key_single_call_mode
Valid values: <true>, <false>
Default: true
Description: Set to <true> the phone
simulates a simple analog phone which
is able to handle one call in parallel only.
Codec and DTMF settings
codec_name
Valid values: <ulaw>, <alaw>, <gsm>,
<g729> (also <g722>, <g723> for
snom190 only)
Default: ulaw
Description: Name of the preferred
codec.
packet_size
Valid values: <80>, <160>, <240>,
<320>
Default: 160
Description: Packet size in bytes. Affects
only ulaw and alaw codecs (other codecs
have fi xed packet size). 80 (10 ms), 160
(20 ms), 240 (30 ms) and 320 (40 ms)
bytes are available.
dtmf_type_outofband
Valid values: <true>, <false>
Default: true
Description: Options for Out of band
DTMF. <true> forces the use of Out of
band DTMF, <false> turns it off. Its used
for H.323 only !
]
snom technology AG