Honeywell UV100RM TrueUV Product Data page 4

UV100RM TRUEUV™ COIL TREATMENT SYSTEM
ADJUSTABLE
BRACKET
Fig. 3. Angled mounting bracket mount to internal surface.
Attach shield to bulb in such a manner as to direct UV-C light
away from access panel for secondary safety to prevent direct
exposure to light.
Fig. 4. Attach shield to bulb.
68-0297EFS—05
SURFACE OF
AIR HANDLER
M27084
M27062
4
Mount ballast in chosen location. Drill 3/4-inch hole to run cord
from location of handle to ballast location. Use grommet to seal
hole around cord.
Fig. 5. Connect cord from handle to ballast location.
Attach base to handle. Base should be used for internal
mounting applications as it activates an internal safety switch
in the handle. Snap bulb into handle.
Fig. 6. Attach base to handle.
Adhere Safety Precautions/Template sticker outside of the duct
near the access panel or near the location of TrueUV and write
the location of the ballast (switch) on the sticker.
M27079
M27060