2.2.1.2
Battery Thermistor
The battery thermistor can be of either PTC or NTC type. The resistor value of both
the thermistor and the bias resistor shall be selected so that the most optimal ADC-
range is available. The slope of the Thermistor curve is not important.
Wireless
CPU type
GS64
GR64001
GR64002
GR64002
There are four temperatures that must be calibrated (low, resume_low, resume_high,
high).
Temp mode
low
resume_low
resume_high
high
Gx64 APPLICATION NOTE
Charging Interface
Page: 9/20
VREF level
Description
1.8V
R
, R
BIAS
2.8V
R
, R
BIAS
1.8V to 2.8V
R
, R
BIAS
The value of R
>2.8V to 5.0V
voltage level on ADIN1 does not exceed 2.5V at
any extreme temperature.
Temp
Description
(°C)
Low temperature limit. Charging will be suspended if
0
temperature goes below this limit.
Charging resume level. After the low limit has been
+4
reached, charging will not resume until temperature
exceeds this level.
Charging resume level. After the high limit has been
+36
reached, charging will not resume until temperature
is below this level.
High temperature limit. Charging will be suspended
+40
if temperature goes above this limit.
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable
values should be the same.
TH nom
values should be the same.
TH nom
values should be the same.
TH nom
should be selected so that the
BIAS
Need help?
Do you have a question about the GX64 and is the answer not in the manual?
Questions and answers