Tcp/Ip - Wavecom Gx64 Application Note

4.5

TCP/IP

In addition to printing the out debug print statements, the Optitrace tool has the
ability to output a PCAP file when you are doing IP transfers. If you are having
problems with sending or receiving TCP/IP traffic then reading the PCAP file from
the module will tell you what data the module sent and received. The PCAP file is
generated when the IPTracePackets filter, in the Internet Protocol Trace Group, is on.
In version 1.4.2 of Optitrace, toggling the connection to off [past red-grean light
here] isn't good enough to generate the PCAP file. The application must be
shutdown after taking the trace for the PCAP file to be generated.
Gx64 APPLICATION NOTE
Using Optitrace
Page: 13/18
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable