Table of Contents
Advertisement
The format of the unsolicited response is:
CONNECT
Notes:
•
It can take up to 30sec to receive the CONNECT message from the network when connecting.
•
CONNECT is never received if the call end is NOT a modem (cannot accept async data calls).
4.2.12.7
NV Restored Unsolicited Message
The CM52 produces an unsolicited message when the module is forced to restore the NV image. Backup and
restore occurs without user interaction.
The format of the unsolicited response is:
*EUNSOL: NV Restore
The goal of the backup system is to restore as much of the lost data as possible in the case of a corruption in
the NV file system. This should allow the module to return to an acceptable working state. An acceptable
working state would be the ability to resume making voice and data calls. However, it is acceptable for some
data to be lost. Currently, the following data cannot be recovered:
SMS messages stored in the module
Note: The restore capability should not be used in place of the correct power down procedure.
4.2.13
AT$QCPREV (Display Current CDMA Protocol Revision)
Description
Reads protocol revision
This command allows an application to query the current CDMA protocol revision that is in use. The revision
that is in use is one that the mobile station and base station agree to use when service is established.
Parameter
<revision>
1
3
4
6
4.2.14
AT*ENETTIME (CDMA Network Time)
Description
Set time format
Read time
Syntax
AT$QCPREV
Description
JSTD008
IS95A
IS95B
IS2000
Syntax
AT*ENETTIME= <setting>
AT*ENETTIME? When
setting is 0
Confidential
USERS MANUAL
Document number
1/198 17-4/FCP 101 3045 Uen
Possible responses
$QCPREV: <revision>
OK
Possible Responses
OK
*ENETTIME: <GMTtime >
OK
47(158)
Revision
D
Advertisement
Table of Contents
