Arcam rDAC Faq
Arcam rDAC Faq

Arcam rDAC Faq

Wireless usb transmitter
Hide thumbs Also See for rDAC:

Advertisement

23425
My rDAC/rWave is plugged into my PC but I get no audio or I get sound out of my laptop speakers. What gives?
It is possible that the rDAC/rWave is not the default sound playback device, and thus audio is still coming out of the normal PC sound card or laptop speakers.
(The rDAC's green light shows that the host PC is aware of the rDAC as an audio device, and is operating correctly).
To prevent this from happening, please connect your rDAC / plug in your rWave before starting your audio application (e.g. iTunes, Windows Media Player etc).
The procedure to change the default sound playback device varies by operating system. As the device is plugged in or unplugged, the operating system may or
may not automatically select the Arcam rDAC/rWave as the default device.
Windows XP:
Via the Control Panel, open Sounds and Audio Devices.
The third tab, Audio, shows a drop-down box to select
the default sound playback device. Select the device called
Arcam DAC (rDAC) or Arcam Wireless Audio (rWave).
Mac OS X:
Via the Apple in the top-left corner of the screen,
select System Preferences. Under the Hardware
section, select Sound. Select the 'Output' tab. From
the list of devices in the Output tab, select Arcam
DAC (rDAC) or Arcam Wireless Audio (rWave).
& rWave — FAQ
Windows Vista / 7:
Via the Control Panel, select the Sound item. The Playback
tab shows a list of playback devices. Select the device called
Speakers (Arcam DAC) or Speakers (Arcam Wireless
Audio).
Linux distributions:
The two most popular window systems,
GNOME and KDE provide system
configuration utilities to select the playback
device. As this varies by distribution,
by version and by users' specific
configurations, we cannot provide detailed
instructions here. However, all linux
systems that we tested in 2010 somewhere
facilitated changing the playback device.
Select the ' A rcam DAC' or ' A rcam Wireless
Audio' device.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the rDAC and is the answer not in the manual?

Questions and answers

Summary of Contents for Arcam rDAC

  • Page 1 My rDAC/rWave is plugged into my PC but I get no audio or I get sound out of my laptop speakers. What gives? It is possible that the rDAC/rWave is not the default sound playback device, and thus audio is still coming out of the normal PC sound card or laptop speakers.
  • Page 2 It is advisable to plug in the rDAC/rWave before turning your computer on, so that it will be fully initialised before you start any of your applications. I keep hearing operatinng system sounds through my hi-fi system when the rDAC/rWave is connected. I do not want to hear sounds every time I get an email, click a link etc.
  • Page 3 This is most likely to occur if the rDAC/rWave is plugged into a different USB port on a PC to where it was previously connected. Windows XP exhibits this issue. The remedy is to “un-install” the device from the operating system to give Windows XP a clean start when the rDAC/rWave is next attached.
  • Page 4 3) Expand the section in the tree Sound, video and game controllers. 4) Highlight the item USB Audio Device. This is likely to be the Arcam rDAC/rWave, but could be another audio device if there are multiple USB Audio Devices in your system.

This manual is also suitable for:

Rwave

Table of Contents