Advertisement
Swiping your Finger
To successfully swipe your finger,
start your swipe by placing your
fingertip on the downward facing
arrow at the top of the biometric
sensor. Swipe your finger in a
downward motion across the
sensor. If your swipe is successful
the
GREEN
LED will start to flicker.
Basic LED States
Solid
Flashing
Solid
Solid
Flashing
Aegis
RED
= Standby, swipe finger to unlock
RED
= Error
BLUE
/ Flashing
GREEN
= Drive unlocked
GREEN
= Disk activity
Bio
Quick Start Guide
1
2
3
4
4
GREEN
= Ready to enroll fingerprint
3.0
LOCK
RED
LED
UNLOCK
GREEN
ADMIN
BLUE
ENROLL Button
LED
LED
Start
swipe
here
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Apricorn Aegis Bio 3.0
Summary of Contents for Apricorn Aegis Bio 3.0
-
Page 1: Quick Start Guide
Aegis Quick Start Guide LOCK UNLOCK GREEN ADMIN BLUE ENROLL Button Start swipe here Swiping your Finger To successfully swipe your finger, start your swipe by placing your fingertip on the downward facing arrow at the top of the biometric sensor. - Page 2 Getting Started - Out of the Box TIP: We highly recommend that you enroll at least three different fingers to ensure access to the drive in the case that your primary finger cannot be used. Attach the integrated USB cable of the Aegis Bio to an available USB port on your computer.
-
Page 3: Unlocking The Aegis Bio
Unlocking the Aegis Bio Once your fingerprints are enrolled, unlock the Aegis Bio using the directions below. Attach the integrated USB cable of the Aegis Bio to an available USB port on your computer. The Aegis Bio LED will show Solid indicating that the drive is locked and is in Standby mode. -
Page 4: Enrolling A New Finger
This gives you the ability to check for up-to-date information 2. E-mail us at support@apricorn.com 3. Or call the Technical Support Department at 1-800-458-5448 Apricorn’s Technical Support Specialists are available from 8:00 a.m. to 5:00 p.m., Pacific Standard Time Monday through Friday...
Need help?
Do you have a question about the Aegis Bio 3.0 and is the answer not in the manual?
Questions and answers