Power Steering Fluid - Ford 2007 Fusion Owner's Manual

Maintenance and Specifications
The OBD-II system is designed to check the emission control system
during normal driving. A complete check may take several days. If the
vehicle is not ready for I/M testing, the following driving cycle consisting
of mixed city and highway driving may be performed:
15 minutes of steady driving on an expressway/highway followed by 20
minutes of stop-and-go driving with at least four 30 second idle periods.
Allow the vehicle to sit for at least eight hours without starting the
engine. Then, start the engine and complete the above driving cycle. The
engine must warm up to its normal operating temperature. Once started,
do not turn off the engine until the above driving cycle is complete. If
the vehicle is still not ready for I/M testing, the above driving cycle will
have to be repeated.

POWER STEERING FLUID

Refer to scheduled maintenance information for the service interval
schedules. If adding fluid is necessary, use only MERCON ATF.
• 2.3L I4 Engine
• 3.0L V6 Engine
255
2007 Fusion (fsn)
Owners Guide (post-2002-fmt)
USA (fus)