Connecting Via Esata - Apricorn Aegis Padlock Pro Quick Start Manual

Connecting via eSATA

eSATA/USB Combo
Connector
If you are using the eSATA/USB combo
connector on your computer, attach one
end of the eSATA data cable to the Aegis
Padlock Pro, and then attach the other
end to the eSATA/USB combo connector
on your computer, as shown below.
Note: When you are using the
eSATA/USB combo connector,
the eSATA data cable functions
as a data cable and power cable
simultaneously, in most cases
you should not need the USB
power cable.
Button Panel
1
4
ghi
7
pqrs
cancel
2 3
abc def
5 6
jkl mno
8 9
wxyz
tuv
0
Standard eSATA
Connector
If you are using the standard eSATA
connector on your computer, attach
both the USB AC Adapter and the
eSATA data cable to the Aegis Padlock
Pro and your computer, as shown
below.
Note: As the Standard eSATA
connection transfers data only
and does not provide power,
you will need to use the
USB power cable.
Remember to save your password
in a safe place. If lost or forgotten,
there is no way to access the drive.
If you are having difficulty please
refer to the complete user's manual
which is loaded on your Aegis
Padlock Pro drive and is also available
at Apricorn's website at:
www.apricorn.com/support
1
2
3
Cancel button
button
LED Indicator light