Cloning Script; Cloning With Manual Partitioning; Old And New Disk Partition Layou S - Apricorn EZ Gig II User Manual

Transferring the system to a new disk
7.3.6

Cloning script

In the next window, you will see the disk cloning script containing a list of briefly
described operations to be performed on the partitions.
After you click Proceed, Apricorn EZ Gig II will start cloning the old disk to the new
disk, indicating the progress in the special window. You can stop this procedure by
clicking Cancel. In that case, you will have to repartition and format the new disk
or repeat the cloning procedure.
After the operation is complete, you will see the results message.
7.4

Cloning with manual partitioning

7.4.1 Old and new disk partition layouts
The manual transfer method enables you to resize partitions on the new disk. By
default, the program resizes them proportionally.
In the next window, you will see rectangles indicating the source hard disk,
including its partitions and unallocated space, as well as the new disk layout.
Along with the hard disk number, you will see partition number, volume label (e.g.
SYSTEM), file system (e.g. FAT16 or FAT32) and partition size in megabytes (Mb).
Different partition types, including primary, logical and unallocated space are
marked with different colors.
36
Disk partitioning script