Restoration Script - Apricorn EZ Gig II User Manual

Restoring a disk (partition) from an image
After this, you will see the partition selection window again and will have to repeat
the actions mentioned above.
If you want to restore only one disk (partition) or have already selected all of the
partitions you need, don't set this switch and click Next.
5.11

Restoration script

In the next window, you will see a disk or partition image restoration script containing a
list of operations to be performed.
After you click Proceed, Apricorn EZ Gig II will start image restoration, indicating
the progress in the special window. If you click Cancel, no changes will be made to
disk(s).
However, it is critical to note that the partition that should have been restored from
the image will be deleted and its space unallocated – the same result you will get if
the restoration is unsuccessful. To recover the "lost" partition, you will have to
restore it from the image again.
After the restoration is finished, you will see a message about its results.
28
You can restore another partition during this operation
Restoration scenario