Selecting Source Disk; Selecting Destination Disk - Apricorn EZ Gig II User Manual

We recommend using automatic mode in most cases. The manual mode can be
useful if you need to change the disk partition layout.
If the program finds two disks, one partitioned and another unpartitioned, it will
automatically recognize the source disk as the partitioned disk and the destination disk
as the unpartitioned disk, so the next two steps will be bypassed.
7.3.2

Selecting source disk

If the program finds several partitioned disks, it will ask you which is the source (i.e.
the older data disk).
You can determine the source and destination using the information provided in this
window (disk number, capacity, label, partition and file system information).
7.3.3

Selecting destination disk

After you select the source disk, you have to select the destination where the disk
information will be copied.
Transferring the system to a new disk
33