Interupting The Cloning Process; Aborting The Cloning Process; Interupting The Verification Process - Apricorn DriveWire User Manual

Interupting the Cloning Process

The cloning process can be stopped at anytime using the "Stop" button.
Continue cloning by clicking "Continue copying". To stop the clone
completely, select "Abort copying."

Aborting the Cloning Process

If the cloning process aborted, a new clone must be commenced.

Interupting the Verification process

If you chose the "Verify Copy" option before starting the clone, EZ Gig will
automatically compare the information on the "Source" and "Destination"
drives once the clone is complete. If this process is interupted or stopped
at anytime, the aborted verification run will have no influence on the copied
data. The copy itself is already finished at that point of time.
When the final report is read, EZ Gig will report that the clone is only
partially verified.
www.apricorn.com
25