8-channel unidirectional level interface consumer out to pro in (1 page)
Summary of Contents for Aphex EQF 500
Page 1
EQF 500 ® 3 BAND EQ WITH HPF AND LPF JENSEN TRANSFORMER BALANCED OUTPUT 500 SERIES MODULE Owner’s Manual...
Page 2
European Union rules, regulations, and guidlines for use. Do 3. Connect the equipment into an outlet on a circuit different from not attempt to modify or change the EQF 500, as this could void that to which the receiver is connected.
Page 3
5.0 SPECIFICATIONS 5. Use the 2 thumb screws in the module to mount the EQF 500 front panel to the 500 series rack. These screws have a pretty tight fit; please be careful not to cross thread.
Page 4
2.0 INTRODUCTION 3.0 CONTROLS & INDICATORS The EQF 500 is a reissue that is our modern take on the classic 3.1 HIGH FREQUENCY CONTROLS Aphex EQF-2 500 series equalizer. The original EQF-1 500 module was designed in 1976 while the EQF-2 500 was an upgrade that These controls let you optimize the high fre- included shelving EQ for the high and low bands.
Page 5
EXCLUSION OF CERTAIN DAMAGES high frequency. Frequencies below that setting are untouched. Aphex Systems’ liability for any defective unit is limited to the repair or High peaking EQ will boost or cut only a small amount of frequen- replacement of said unit, at our option, and shall not include damages of cies above and below the selected high frequency.
20KΩ Nominal Level: +4dBu OUTPUT - (+4 LEVEL) Maximum Level: +24dBu CMRR: >40dB COMMON This product is protected under one or more of the following Aphex patents. (unused) OUTPUT (unused) 5,450,034 6,266,423 Impedance: 110Ω INPUT- (+4 LEVEL) Nominal Level +4dBu...
Need help?
Do you have a question about the EQF 500 and is the answer not in the manual?
Questions and answers