Quick Start; Unpacking And Inspecting; Simple Setup - Aphex EXCITER Owner's Manual

1.1 UNPACKING AND INSPECTING

Your Aphex product was carefully inspected and packaged at the factory prior to shipment. The carton and its
internal packing materials are designed to protect the unit from most rough handling than can occur during
transport and handling. However, you should thoroughly inspect the carton and its contents for signs of physical
damage before attempting to use this device. It is your responsibility to immediately report any damage to your
dealer or the freight company so that a damage claim can be appropriately filed. Shipping claims are always the
responsibility of the consignee (that's you).
We also encourage you to save all of the original packing materials in the event that this unit should ever have to
be returned to the dealer or factory for repair.

1.2 SIMPLE SETUP

To get started fast, follow the wiring diagram for an in-line application shown below. If you need to run the Exciter
with an insert patch instead, refer to section 5 for more information. Finally, refer to the control settings below to
get your Exciter sounding great. Don't neglect to later run through this manual, however, as there is a wealth of
useful information here for you.
TYPICAL CONNECTIONS FOR USING THE AURAL EXCITER AND
Source
Device
(Line Level)
OPTICAL BIG BOTTOM IN AN IN-LINE CONFIGURATION
Ch1
Aural Exciter
Big Bottom
Ch2
Ch1
and
A
Optical
Ch2
Owner's Manual

1.0 Quick Start

Destination
Device
(Line Level)
Page 5