Features - AOpen ISDN SOHO Router User Manual

1.1 Features

Integrated all-in-one design for ISDN TA, NT1, hub, and router
It saves the expense on purchasing NT1 and hub device. Moreover, it eases the cable
connection and separates installation for the all-in-one design.
One page quick configuration guidance
With the one-page quick configuration guidance, the end-user can install the router following
the step-by-step procedure and operate the router easily. Even the first-time user will have no
problem following the instruction to link to ISP (Internet Service Provider) and connect the
LAN correctly.
On line remote maintenance
The router has a built-in a remote maintenance facility to help the end-user to troubleshoot.
The maintenance center can dial in remotely to diagnose and correct the wrong settings to fasten
connection to the ISDN network.
Two analog ports supported for normal telephony application
It allows you to use regular telephone to make outgoing/incoming calls just like using a regular
telephone at home.
Support BACP/BOD for dynamic bandwidth demand
With the voice priority first mechanism at work, it fully utilizes the 128K ISDN bandwidth to
ensure no voice calls missing. Under ML-PPP connection, the router can automatically release
one B channel for voice communication and return to 128K bandwidth when the receiver hung
up.
Dial On Demand to save communication cost
Dial-On-Demand activates the PPP link when needed. Whenever there is an outgoing packet,
the router makes an outgoing connection automatically and disconnects the PPP link after the
system is idle for specific amount of time (configured by the user) to save cost on
communication.
Dial-in and call back security
The dial-in function enables you to remotely access your LAN. The call-back security can
protect your LAN from any attempts of illegal accessing.
ISDN Router Manual V.1.1 5