AMX PT10-PLV Instruction Manual page 22

Using the AXP-PLV PosiTrack Video Pilot
Press the CONFIG button on the CAMERA page to open the CAMERA CONFIGURATION
page:
• set home button
• set up button
• clear up button
• set down button
• clear down button
• set right button
• clear right button
• set left button
• clear left button
• back button
• reverse pan button
• reverse tilt button
• SETUP button
• TPD button
• AXS button
18
Use the CAMERA CONFIGURATION page buttons to con-
figure a new camera to the system:
•Set and/or clear limit stops for pan up/down and left/right.
•Set the home position.
•Reverse the pan orientation on the joystick.
•Reverse the tilt orientation on the joystick.
•Enter the touch panel's SETUP screen (for system
administrators only).
Touch to set the home position.
Touch to set the up limit stop.
Touch to clear the up limit stop.
Touch to set the down limit stop.
Touch to clear the down limit stop.
Touch to set the right limit stop.
Touch to clear the right limit stop.
Touch to set the left limit stop.
Touch to clear the left limit stop.
Touch to flip to the previous page.
Touch to reverse the current pan orientation on the joystick.
Touch to reverse the current tilt orientation on the joystick.
Touch to access the touch panel Setup screen (for system administrators only).
Read-only button displays the touchpanel file version running in the Pilot
Controller.
Read-only button displays the Axcess code version running in the Master
(Axcent3 or AXB-EM232).
PT10-PLV Single Camera Pan/Tilt System