American DJ Fusion FX Bar 2 User Instructions page 4

Fusion FX Bar 2
American DJ Supply - www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 7
© ®
System Menu Fusion FX Bar 2
On-Board System Menu.
to navigate system menu. This next section will detail the functions of
each command in the system menu. Please read the next section
thoroughly!
To access the main menu press the MENU button. Tap the UP or
DOWN buttons until you reach function you wish to change. When you
reach the function you wish to change press the ENTER button. When
a function is selected use the UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to confirm and lock the change into the system memory. If the MENU
button is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To
exit without making any changes press the MENU button.
ADDR
1. Tap the MENU button until "ADDR" is displayed, press ENTER.
2. "X" will now be displayed, "X" represents the displayed address.
Press the UP or DOWN buttons to find your desired address.
3. Press ENTER to confirm, and then press and hold the MENU
button
SLND -
master/slave configuration.
1. Tap the MENU button until "SLND" is displayed, press ENTER.
Either "MAST" or "SLAE" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
SHND
1. Tap the MENU button until "SHND" is displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing a number
between 0-2. Programs 1 & 2 are preset show, while "Sh 0" is
American DJ Supply
©
The Fusion FX Bar 2 comes with an easy
- DMX Address Setting via control board -
to assign.
for at least three seconds
This will let you set unit as a master or slave in a
- Show modes 0 - 2 (Factory programs).
- www.americandj.com - Fusion FX Bar 2 Instruction Manual Page 8
®
System Menu