American DJ Mega Tri Bar User Instructions page 9

Mega Tri Bar™ 54 Channel Mode - Traits & Values
Channel Value
35 1 - 255
36 1 - 255
37 1 - 255
38 1 - 255
39 1 - 255
40 1 - 255
41 1 - 255
42 1 - 255
43 1 - 255
44 1 - 255
45 1 - 255
46 1 - 255
47 1 - 255
48 1 - 255
49 1 - 255
50 1 - 255
51 1 - 255
52 1 - 255
53 1 - 255
54 1 - 255
American DJ® - www.americandj.com - Mega Tri Bar™ Instruction Manual Page 17
©
Function
GREEN 0% - 100%
BLUE 0% - 100%
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
RED 0% - 100%
GREEN 0% - 100%
BLUE 0% - 100%
Mega Tri Bar™
The optional IR Remote (sold separately) gives the freedom to
control your fixture from a distance and not have to use the on-
board controls.
To control the your desired fixture you must aim the controller
at the front of the fixture and be no more the 30 feet away. Note:
The IR Remote can be used when the fixtures are connected to
a DMX controller.
BLaCkOUT - Pressing this button will blackout the fixture.
aUTO RUN - This button will run an automatic program. You
can adjust the amount of program cycles by pressing the AUTO
RUN button again. The display will show "n.XXX", "XXX" repre-
senting the current number shown. Press the "+" and "-" buttons
to increase or decrease the amount of program cycles.
PROGRaM SELECTION - This button will let you access one of
the seven static color selections. Pressing this button and then
press the "+" or "-" to navigate through the different programs.
FaDE - This button will activate the fade effect. You can control
the fade speed by pressing the "+" and "-" buttons. Press this
button again to exit fade mode.
SPEED - Press this button and use the "+" & "-" buttons to ad-
just the speed of a program.
SOUND aCTIVE - This button activates sound active mode.
Sound active mode will not work for outdoor LED lights.
SLaVE - This designates the fixture as a slave fixture in a mas-
ter/slave configuration.
RGB - Press either one of these buttons, and then press the "+"
and "-" to adjust the brighness.
"+" and "-" Buttons - Use these buttons to adjust the fade
speed, Auto Run speed, dimming, and program selection.
American DJ® - www.americandj.com - Mega Tri Bar™ Instruction Manual Page 18
©
Optional IR Wireless Controller