Battery Status - American DJ Quad Phase Go User Instructions

Quad Phase Go
Channel Value
1 0 - 255
1 - 16
17 - 33
34 - 50
51 - 67
68 - 84
85 - 101
102 - 118
119 - 135
136 - 152
153 - 169
170 - 186
187 - 203
204 - 220
221 - 237
238 - 255
2
0 - 9
10 - 120
121 - 134
135 - 245
246 - 249
250 - 255
3
0
1 - 255
4
0 - 15
16 - 255
ADJ Products, LLC - www.adj.com - Quad Phase Go Instruction Manual Page 17
DMX Traits
Function
COLOR SELECTION
COLOR 1
COLOR 2
COLOR 3
COLOR 4
COLOR 5
COLOR 6
COLOR 7
COLOR 8
COLOR 9
COLOR 10
COLOR 11
COLOR 12
COLOR 13
COLOR 14
COLOR 15
ROTATION
NO ROTATION
CLOCKWISE FAST - SLOW
NO ROTATION
COUNTER-CLOCKWISE
SLOW - FAST
NO ROTATION
SOUND ACTIVE
STROBING
OFF
STROBING SLOW - FAST
SHUTTER OPEN
OFF
OPEN
Quad Phase Go

Battery Status:

This function is used to check the life status of the battery.
Plug the fixture in and press the MODE button until "BATT" is
displayed. Use the UP or DOWN buttons to scroll to "STAT"
and press ENTER. The number that is displayed is the remain-
ing battery life. Please do not let the battery fully die, this
severly shortens the life of the battery.
Example: If "50" is displayed, the battery is at half life. If "25" is
displayed, the battery is at 25% life.
NOTE: When the battery is charging or if the battery life is
below 30% the digital display will flash.
Battery Recharge: To recharge the battery, plug the supplied
AC cord into the AC input on the side of the unit and plug the
other end into a matching power supply.
Press the MODE button until "BATT" is displayed, and press
ENTER.
Use the UP or DOWN buttons to scroll to the menu "CHAR"
then press ENTER.
Use the UP or DOWN buttons to scroll to "ON", and press
ENTER. The after you select "ON" the battery is now being
charged. To stop charging the battery, select "OFF".
If the battery is being charged, and the unit is not being used,
press the MODE button until "BATT" is displayed, and press
ENTER. Use the UP or DOWN buttons to scroll to "LOAD" and
press ENTER. Select "ON" to keep the LED on, or "OFF" to
blackout the unit.
It takes about 6 hours to reach full charge.
Note: When unplugging the unit from charging and then
applying power via battery, there will be a minimal charge
drop.
ADJ Products, LLC - www.adj.com - Quad Phase Go Instruction Manual Page 18
Battery Status & Charging