American DJ Quad Phase Go User Instructions page 7

Quad Phase Go
DISP -
This function will reverse the display 180º.
1. Tap the either the MENU button until "DISP" is displayed,
press ENTER.
2. Press the UP button to select "DSIP" to to invert the display,
or "DISP" to revert it.
3. Press ENTER to confirm.
BATT
- This function is used for battery charging.
1. Press the MENU button until "BATT" is displayed, press
ENTER.
2. Either "CHAR", "LOAD", or "STAT" will be displayed. Use the
UP or DOWN buttons to scroll through the functions, and press
ENTER to select your desired function.
• CHAR (Charging) - When this is selected you are able to charge
or stop charging the battery. When a power cable is connected
and "ON" is selected, the battery is now being charged. To stop
charging, select "OFF".
• LOAD (LED On or OFF) - This will let you blackout the LED while
charging. Select "OFF" to blackout the LED or "ON" to stop the
LED blackout.
• STAT (Charge Status) - This will let you check the battery status.
3. Press ENTER to confirm your setting and exit.
FHRS
- With this function you can display the running
time of the unit.
1. Tap the either the MENU button until "FHRS" is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
ADJ Products, LLC - www.adj.com - Quad Phase Go Instruction Manual Page 13
System Menu Quad Phase Go
to exit.
VER
the unit.
1. Tap the either the MENU button until "VER" is displayed,
press ENTER.
2. The display will show the software version.
- Use this function to display the Software version of
ADJ Products, LLC - www.adj.com - Quad Phase Go Instruction Manual Page 14
System Menu