OmniAccess AP60/61: Installation Guide
Connecting the Console Terminal
Manual provisioning requires this procedure. You must use the serial console
breakout adapter cable to be able to access the serial console interface to the
AP60/61 while allowing the device to be powered by the AC adapter or POE
(from an OmniAccess Wireless LAN switch).
—The LAN connections are optional unless POE is used to power the AP.
N
OTE
Console Access to the AP
1
16
Part 031643-00 Rev. 01
F
2-3 OmniAccess AP60/61 Console Topologies
IGURE
"To AP" Connector
to AP FE Port
F
2-4 Connecting Directly to the AP
IGURE
DB-9 Connector
2
to Console Terminal
"To Network" Connector
to FE Coupler
3
to LAN FE Cable
To LAN
June 2005