Paging Groups; Paging Messages - Aiphone CommunCenter Operation Manual

For ipw-1a intercom-over-ip adaptor

Table of Contents

8.2 Paging Groups

o Under the Paging Groups tab you will have the option to create different paging groups. Type

in a group name in the box to the left of the Create Group button. Next click on the Create

Group button. You will now see the name in the Groups list. To delete the group from the

Groups list, select the group and then click the Delete button. The final step is to select which

sub stations you want in your group. Select the group from the Groups list, then in the

Connected Device list, use the check box under the Group column to add the desired sub

stations to your group. Clicking on the Refresh button will update the list with the latest devices

available.

o Under the Paging Messages tab you can create messages from .wav files on your PC. To

enable the user to browse for a file in the Paging Message pop-up window, the „Allow direct

browse for files‟ box must be checked. Otherwise, only the pre-configured messages will be

selectable. Use the Select .wav file... button to browse your PC for a .wav file. Files must

match your Audio Settings. If you‟re setup for "Normal" bandwidth then your file must be 16-bit,

8kHz, PCM (uncompressed), if you‟re in "Low" bandwidth mode then your file must be 8-bit,

8kHz uLaw (compressed). Next, create a Nickname in the space provided, then click on the

Add Nickname button. Your saved messages will be shown in the lower list view window. To

remove a message from the list, select the message and then click on the Remove Nickname

button.

Create and name group

Select sub station(s) via check box

Updates the connected devices list

Enables the user to browse for a file in

the Paging Message pop-up window

Type nickname here

List of saved messages

Pg. 9

Table of Contents

Show Quick Links

Table of Contents