Chapter 4 Remote Interface Reference
To set the baud rate
To set the baud rate
You can select one of six baud rates for
to 9600 baud when the function generator is shipped from the factory.
See also "Baud Rate Selection," on page 116.
Shift
1 Turn on the menu.
Menu On/Off
<
<
2 Move across to the
>
>
3 Move down a level and then across to the
¿
4 Move down to the "
¿
Use the left/right arrow keys to see the baud rate choices. Choose from
one of the following: 300, 600, 1200, 2400, 4800, or 9600 baud.
Enter
5 Save the change and exit the menu.
The baud rate selection is stored in non-volatile memory, and does not
change when power has been off or after a remote interface reset.
A: MOD MENU
I /O MENU
E: I/O MENU
3: BAUD RATE
PARAMETER
9600
BAUD
-232 operation. The rate is set
RS
choice on this level.
BAUD RATE
" level to select the baud rate.
4
choice.
219