P/Ar - HP 4935A Operating And Service Manual

T R A N S M I S S I O N
0 0
i
P/AR - TRANSMITTER (Option 002 and 003)
a. Press DISPLAY TRMT-RCV key to display the transmitted signal. TRMT light will be on.
b.
Press MEAS key to select P/AR.
P/AR is +3 dBm.
P/AR - RECEIVER (Option 002 and 003)
a.
Press DISPLAY TRMT-RCV key to display the received signal. RCV light will be on.
b.
Press MEAS key to select P/AR.
Read P/AR units in right display.
T E S T S E T
knob to adjust signal
Figure 3-2. Measurements (Continued)
level to data level. Maximum output for
Operation