Agilent Technologies E6651A User Manual page 153

Declaration
Return Value
Description
Declaration
Return Value
Description
Declaration
Return Value
Description
E6651A User's Guide
E6651_SetBSRNGRSPOffset
int E6651_SetBSRNGRSPOffset(BYTE MID, int value);
MID [in]:
Parameter
Value [in]:
Success:
Failure:
Set Power Offset of E6651(MID) is user can set additionally
during Initial Ranging or Periodic Ranging.
E6651_GetBSREPREQEnable
int E6651_GetBSREPREQEnable(BYTE MID, int *
Value);
Parameter MID [in]:
Value [out]:
Success:
Failure:
Retrieve REP- REQ using or not value.
E6651_ GetBSREPREQEnable returns 0(Disable) if REP- REQ
was not used, or returns 1 if REP- REQ was used.
E6651_SetBSREPREQEnable
int E6651_SetBSREPREQEnable(BYTE MID, int
Value);
MID [in]:
Parameter
Value [in]:
Success:
Failure:
Set the value decides to use REP- REQ or not of E6651(MID).
E6651_SetBSREPREQEnable sets 0(Disable) if REP- REQ will
not be used, or returns 1 if REP- REQ will be used.
Remote Interface (API) Programming Command Reference
E6651's equipment number to be controlled
remotely.
Power Offset of E6651(MID) is user can set
additionally during Initial Ranging or Periodic
Ranging to be set.
STATE_SUCCESS(1)
STATE_ERROR(- 1)
E6651's equipment number to be controlled
remotely.
Current value is indicated that REP- REQ is
used or not
STATE_SUCCESS(1)
STATE_ERROR(- 1)
E6651's equipment number to be controlled
remotely.
The value decides to use REP- REQ or not to
be set.
STATE_SUCCESS(1)
STATE_ERROR(- 1)
6
153