Agilent Technologies E6651A User Manual page 107

Declaration
Return Value
Description
Declaration
Return Value
Description
Declaration
Return Value
Description
E6651A User's Guide
E6651_SetSPMMode
int E6651_SetSPMMode(BYTE MID, int Mode);
MID [in]:
Parameter
Mode [in]:
Success:
Failure:
Turn On or Turn Off Time Gate mode when E6651(MID) is
operating in Spectrum Analyzer mode.
E6651_GetUIQMax
int E6651_GetUIQMax(BYTE MID, double * Value);
Parameter MID [in]:
Value [out]:
Success:
Failure:
Retrieve Maximum Flatness value when E6651(MID) is
operating in Uplink Flatness Measure Mode.
E6651_GetUIQMin
int E6651_GetUIQMin(BYTE MID, double * Value);
Parameter MID [in]:
Value [out]:
Success:
Failure:
Retrieve Minimum Flatness value when E6651(MID) is
operating in Uplink Flatness Measure Mode.
Remote Interface (API) Programming Command Reference
E6651's equipment number to be controlled
remotely.
Time Gate Mode information of E6651(MID)
when E6651 is operating is Spectrum
Analyzer mode.
ON: 1
OFF: 0
STATE_SUCCESS(1)
STATE_ERROR(- 1)
E6651's equipment number to be controlled
remotely.
measured Maximum Flatness value when
E6651(MID) is operating in Uplink Flatness
Measure Mode.
STATE_SUCCESS(1)
STATE_ERROR(- 1)
E6651's equipment number to be controlled
remotely.
measured Minimum Flatness value when
E6651(MID) is operating in Uplink Flatness
Measure Mode.
STATE_SUCCESS(1)
STATE_ERROR(- 1)
6
107