Shipping Guidelines - HP E1328A Service Manual

Shipping
Guidelines
*
We recommend that you use the same shipping materials as those used in factory packaging (available from Hewlett-Packard). For
other (commercially-available) shipping materials, use a double wall-carton with minimum 2.4 MPa (350 psi) test.
16 Installation
Follow the steps in Figure 2-1 to return the HP E1328A D/A Converter to a
Hewlett-Packard Sales and Support Office or Service Center.
1 Prepare the D/A Converter
2 Package the D/A Converter
3 Ship the D/A Converter to Hewlett-Packard
Figure 2-1. Packaging/Shipping Guidelines
Remove user wiring from the module
Attach tag to module/pod that identifies
- Owner
- Model Number/Serial Number
- Service Required
Place tagged device in approved anti-static bag
Place packaged D/A Converter in shipping carton*
Place 75 to 100 mm (3 to 4 inches) of shock-
absorbing material around the D/A Converter
Seal the shipping carton securely
Mark the shipping carton FRAGILE
Place address label on shipping carton
Send carton to Hewlett-Packard
Chapter 2