Changing The Frame - AgfaPhoto AF 5077 User Manual

af-5077_5087_5107psms_manual_03_en_253243477-a.book Seite 11 Donnerstag, 2. Juli 2009 11:41 11
Service
EN

Changing the frame

You can change the frame of the device using the
picture frames supplied. The frames are held with
magnets.
Problems
Photo Frame does not power on.
Cannot save files
No sound
Memory card can not be recognized
Not all files of the memory card will be shown for
the slide show, movie and music play back.
11
1 Press on the change frames key on the back of
the device. Remove the frame.
2 Place the picture frame onto the device until it
engages on the magnets.
Solutions
Check that you connect the AC adapter to the
frame properly.
Make sure that enough internal memory is availa-
ble. Re-start the picture frame and delete some
files in order to free up memory space.
Make sure the file format is supported, the compu-
ter and the frame are correct connected or the
memory card is not damaged.
If you connected the frame to a computer, the in-
serted memory card can not be recognized.
Check whether a playlist is switched on.