Phone; Enhancement - Nokia 8800 User Manual

M e n u f u n c t i o n s
Send my caller ID
service) > Yes, or
Line for outgoing calls
service) — to select the phone line 1
or 2 to make calls, if supported by
your SIM card.

Phone

Select Menu > Settings
and from the following options:
Phone language — to set the display
language of your phone. If you select
Automatic, the phone selects the
language according to the
information on the SIM card.
Memory status — to view the free
memory and the used memory for
each function in the list.
Automatic keyguard
keypad of your phone to lock
automatically after a pre-set time
delay when the phone is in the
standby mode and no function of the
phone has been used. Select On, and
you can set the time from 5 seconds
to 60 minutes.
Security keyguard
phone to ask for the security code
when you unlock the keyguard. Enter
the security code, and select On.
When the keyguard is on, calls still
may be possible to the official
emergency number programmed
into your device.
42
(network
Set by network.
(network
> Phone
— to set the
— to set the
Copyright © 2005 Nokia. All rights reserved.
Cell info display
information from the network
operator depending on the network
cell used (network service).
Welcome note and enter the note
you would like — to be shown briefly
when the phone is switched on.
Operator selection
to set the phone automatically to
select one of the cellular networks
available in your area. With Manual,
you can select a network that has a
roaming agreement with your home
network operator.
Confirm SIM service
"SIM services", page 66.
Help text activation
whether the phone shows help texts.
Start-up tone — to select whether
the phone plays a start-up tone
when the phone is switched on.

Enhancement

This menu is shown only if the phone
is or has been connected to a
compatible mobile enhancement.
Select Menu > Settings
Enhancements. You can select an
enhancement menu if the
corresponding enhancement is or
has been connected to the phone.
Depending on the enhancement,
select from the following options:
> On — to receive
> Automatic —
actions. See
— to select
>