Security; Restore Factory Settings - Nokia 8800 User Manual

M e n u f u n c t i o n s
Personal configuration settings
to add new personal accounts for
various services manually, and to
activate or delete them. To add a
new personal account if you have
not added any, select Add;
otherwise, select Options
new. Select the service type, and
select and enter each of the required
parameters. The parameters differ
according to the selected service
type. To delete or activate a personal
account, scroll to it, and select
Options > Delete

Security

When security features that restrict
calls are in use (such as call barring,
closed user group and fixed dialing)
calls still may be possible to the
official emergency number
programmed into your device.
Select Menu > Settings
and from the following options:
PIN code request
to ask for your PIN or UPIN code
every time the phone is switched on.
Some SIM cards do not allow the
code request to be turned off.
Call barring service
service) — to restrict incoming calls
to and outgoing calls from your
phone. A barring password is
required.
44
—
> Add
or Activate.
> Security
— to set the phone
(network
Copyright © 2005 Nokia. All rights reserved.
Fixed dialling — to restrict your
outgoing calls to selected phone
numbers if this function is supported
by your SIM card.
Closed user group
— to specify a group of people whom
you can call and who can call you.
Security level > Phone
asks for the security code whenever
a new SIM card is inserted into the
phone. Select Memory
phone asks for the security code
when the SIM card's memory is
selected and you want to change the
memory in use.
Access codes — to set the PIN code
or UPIN code in use, or to change the
security code, PIN code, UPIN code,
PIN2 code, and barring password.
Code in use — to select whether the
PIN code or UPIN code should be
active.
Pin2 code request
whether PIN2 code is required when
using a specific phone feature which
is covered by the PIN2 code.

Restore factory settings

To reset some of the menu settings
to their original values, select
Menu > Settings
settings. Enter the security code.
Note that the data you have entered
(network service)
— the phone
and the
— to select
> Restore factory