Activate The Settings; Connect To A Service; Browse - Nokia 6125 User Manual

W e b

Activate the settings

Ensure that the Web
service you want to use are activated.
1. Select Menu > Web
Configuration settings
Configuration.
Only the configurations that
support the browsing service are
shown.
2. Select a service provider or
Personal config. for browsing.
3. Select Account and a browsing
service account contained in the
active configuration settings.
4. If you want to perform manual user
authentication for intranet
connections, select
terminal window

Connect to a service

There are several ways to connect to a
service.
• To open the service's home page,
select Menu > Web
the standby mode, press and
hold 0.
• To select a bookmark, select
Menu > Web > Bookmarks.
• To select the last viewed web site,
select Menu > Web
address.
74 Copyright © 2006 Nokia. All rights reserved.
settings of the
> Settings >
>
Display
> Yes.
> Home; or in
> Last web
• To enter the address of the service,
select Menu > Web
address, enter the address of the
service, and select OK.

■ Browse

It should not be necessary to manually
configure the browser on your phone.
Normally this is done by your service
provider once you have subscribed to
the feature. Contact your service
provider if you have problems using
the browser.
After you make a connection to the
service, you can start browsing its
pages. The function of the phone keys
may vary in different services.
Follow the text guides on the phone
display. For more information, contact
your service provider.
If EGPRS or GPRS is selected as the
data bearer, either
in the top left of the display during
browsing. If you receive a call or a text
message, or make a call during an
EGPRS or GPRS connection,
is shown in the top right of the display
to indicate that the EGPRS or GPRS
connection is suspended (on hold).
After a call, the phone tries to
reconnect the EGPRS or GPRS
connection.
> Go to
or is shown
or