Charge The Battery - Nokia 6125 User Manual

Hide thumbs Also See for 6125:
Table of Contents

Advertisement

G e t s t a r t e d
4. Insert the SIM card into the holder
as shown, beveled corner first, with
the gold-colored contacts on the
SIM card face up (away from the
phone).
5. Swing the SIM card holder closed.
The gold-colored contacts on the
SIM card meet the gold-colored
contacts on the inside of the
phone. Gently press the SIM card
holder into the phone until it clicks
into place.
6. Replace the battery, by positioning
it (with the label side facing up),
so the gold-colored contacts
match up with those on the phone.
Slide the battery in until it snaps
into place.
7. Slide the back cover until it locks
into place.
2
Copyright © 2006 Nokia. All rights reserved.

■ Charge the battery

This device is intended for use with the
BL-4C battery. Always use original
Nokia batteries. See
authentication
Check the model number of any
charger before use with this device.
This device is intended for use when
supplied with power from the AC-3
charger.
For availability of approved
6
enhancements, please check with your
dealer.
1. Connect the charger to a standard
wall outlet.
7
2. Insert the charger plug into the
round jack in the bottom of the
phone. If the battery is completely
discharged, it may take a few
minutes before the charging
Warning: Use only batteries,
chargers, and enhancements
approved by Nokia for use
with this particular model.
The use of any other types
may invalidate any approval
or warranty, and may be
dangerous.
"Nokia battery
guidelines", p. 85.

Advertisement

Table of Contents
loading

Table of Contents