This is caused by several factors. Two lesser factors are power the size of the speaker and its efficiency. The largest factor is The TVC-1 is a tabletop volume control for speakers. It con- Introduction the physical size of the room.
Page 3
TVC-1. 2. Set the Speaker Pairs switch on the rear panel of the TVC-1 to match the number of pairs of speakers (1, 2, 3/4, 5/6).
1. Select a convenient location for the TVC-1. 12 position volume control (American provides greater attenuation Wire Gauge) 2. Run all the necessary wiring to the TVC-1. Label the wires than conventional 10 position designs. number. The lower for future reference. See (Figure 1).
For most applications, we recommend you use 16 or 18 gauge, stranded copper speaker wire for the TVC-1 con- NOTE: To help you avoid improper installation, the nections. For wiring runs longer than 80 feet, 14 gauge wire TOOLS connector plug is keyed.
• Removable screwless connectors accommodate up to dealer or Niles 14 gauge wire 6. Using the knob on the front of the TVC-1, adjust the vol- Customer Service at ume of the speakers to the desired listening level. • Rugged all metal chassis construction 1-800-289-4434.