Adjust Focus (Film Scanners Only - Nikon Scan User Manual

4.10 Adjust Focus (film scanners only)

This function allows you to adjust focus to compensate for
warping of the film or for differences in the thickness of slide
mounts.
To use the Adjust Focus function, choose Adjust Focus... from
the Special Capabilities submenu located on the pull-down
menu at the top left corner of the Main dialog box (the Special
Capabilities menu for the AX-110 and AX-210 does not
include the Autofocus function).
Note: The menu for the LS-4500AF differs from that shown
above. See Appendix B.
When Adjust Focus... is chosen from the Special Capabilities
submenu, the following dialog box appears.
Drag the slider or input the desired value, then click the OK
button.
Note: The values shown at the ends of the slider bar will vary
depending on the autofocus position and the scanner model. The
autofocus position always has a value of zero.
- 29 -