Autoexposure - Nikon Scan User Manual

4.11 Autoexposure

The Autoexposure function can be used to perform a prescan
after a preview operation has been completed.
If you click the Preview button when the Prescan check box is
turned off or while holding down the option key, the prescan
operation will be skipped. In this case, you can carry out a
prescan operation after preview by selecting Autoexposure
from the Special Capabilities submenu.
Note: The pop-up menu shown above is for the LS-1000. The
corresponding pop-up menus for the LS-4500AF and for the
AX-110 and AX-210 are different. Please see the appendix
appropriate to the scanner you using.
The prescanning operation begins immediately on your selecting
the Autoexposure function from the Special Capabilities
submenu.
- 30 -