Mitsubishi Electric DLP HC3900 User Manual page 28

Menu operation (continued)
. FEATURE menu
opt.
FEATURE
AV MEMORY 1
ASPECT
PASSWORD DISPLAY
FUNCTION INPUT
MENU POSITION 1.
MENU DIMMER
CINEMA MODE
?
VIDEO SIGNAL
SETUP
SCART INPUT
LANGUAGE English
A
Ë
RESET ALL
3. FEATURE menu
ITEM
ASPECT
ANAMORPHIC1
ANAMORPHIC
PASSWORD FUNCTION
MENU POSITION
MENU DIMMER
CINEMA MODE
VIDEO SIGNAL
SETUP
SCART INPUT
LANGUAGE
RESET ALL
• When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE(.5:1) in the IMAGE menu, STRETCH,
ANAMORPHIC1 and ANAMORPHIC cannot be selected for ASPECT.
• When SCART INPUT is set to ON, normal computer signals aren't projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren't compatible with this projector.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
AUTO
OFF
AUTO
AUTO
AUTO
OFF
OK
SETTING FUNCTION
AUTO Select to change the aspect ratio automatically depending on the input signal.
4: Select to project images with an aspect ratio of 4:.
16:9 Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1 Select to enlarge and project images of CinemaScope size.
ZOOM Select to enlarge and project images of Vista size.
STRETCH Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:. (Non-
linearly stretched.)
This mode is suitable for viewing .5:1-size images using the anamorphic lens.
Use the p or q key to adjust the vertical display position.
This mode doesn't support input signals from personal computers.
This mode is suitable for viewing 16:9- or 4:-size images or images input from personal
computers using the anamorphic lens.
Use to enable or cancel the password lock. See page 5 for details.
 options Use to change the position of the menu.
ON / OFF Use to reduce the brightness of the menu.
AUTO The film mode will be automatically activated when a film source signal is input.
Select AUTO for normal use.
When flicker occurs on the screen or jaggies on slanting lines are remarkable, select
FILM when a film source signal is input or select VIDEO for other signals.
VIDEO The film mode will not be activated.
FILM Fixed to the film mode.
8 options When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn't displayed correctly, select the desired
video format manually.
AUTO
Select AUTO for normal use. When LANGUAGE is not set to
TV60 signal is input, the SETUP changes to 7.5% automatically.
OFF Select to make black lighter.
.75% / 7.5% Select to make black intense.
• When 7.5% is chosen, the brightness is decreased by the set-up cancel function for
the U.S. Choose OFF when the image is dark.
ON / OFF Choose ON when connecting the projector with a device equipped with the SCART
terminal that can output RGB signal. SCART terminal is used mainly in Europe.
Choose OFF normally. (Available only for the input signal from the COMPUTER IN/
COMPONENT VIDEO IN terminal.)
10 languages Use to select the language used in the menus.
OK Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
EN-8
and 480i, 480p or