Table of Contents
Advertisement
Menu operation (continued)
. INSTALLATION menu
opt.
INSTALLATION
AV MEMORY 1
KEYSTONE
LAMP MODE
STANDARD
AUTO POWER
ON
AUTO POWER
OFF
SPLASH
ON
SCREEN
BACK COLOR
IMAGE
REVERSE
TRIGGER OUT
TEST PATTERN
CROSS HATCH
2. INSTALLATION menu
ITEM
SETTING
KEYSTONE
LAMP MODE
STANDARD
AUTO POWER ON
ON / OFF
AUTO POWER OFF
OFF / 5 - 60min
SPLASH SCREEN
ON / OFF
BACK COLOR
BLUE / BLACK
IMAGE REVERSE
MIRROR INVERT
TRIGGER OUT
ANAMORPHIC
CROSS HATCH
TEST PATTERN
WHITE
BLACK
•
The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW LAMP
MODE has been chosen, the default STANDARD lamp mode is switched to the LOW lamp mode in 1 minute.
•
When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.
•
Do not change the setting of LAMP MODE frequently.
•
To cancel the test pattern, press any button.
0
OFF
OFF
ON
BLUE
OFF
OFF
FUNCTION
±15
Use to correct vertical keystone distortion.
Select this option when you want to view images in a well-lit room.
LOW
Select to moderate the intensity of the lamp. The fan operating sound is
reduced and the lamp lifetime becomes longer.
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
•
The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
Choose ON to display the splash screen when the power is turned on.
Use to change the color of the screen that appears when no signal is
supplied.
OFF
Select when viewing images from the front with the projector installed on the
floor.
MIRROR
Select when viewing images projected from the behind of the screen with the
projector installed on the floor.
INVERT
Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
Select when viewing images from the front with the projector installed on the
ceiling.
SCREEN
The trigger output signal (1 V) is output from the TRIGGER terminal when
the lamp illuminates.
The trigger output signal (1 V) is output from the TRIGGER terminal when
the aspect ratio is set to ANAMORPHIC 1 or ANAMORPHIC .
OFF
The trigger output signal (1V) isn't output.
Select to show the test cross hatch pattern.
Select to show the maximum brightness image.
Select to show the minimum brightness image.
EN-7
Advertisement
Table of Contents
