Changing The Light Tube And / Or Starter - Miele DA 196 Operating Instructions Manual

Changing the light tube
and / or starter
If the lighting is not working the light
tube and/or starter may need changing.
Disconnect the cooker hood from
the mains supply by
– switching it off at the wall socket
and removing the plug (do not pull
on the cable, only on the plug), or
– withdrawing the fuse from the
fused spur connection unit (if ac-
cessible), or
– withdrawing the mains fuse, or
– removing the screw-out fuse (in
countries where this is applicable).
Unscrew the fixing screw of either
the right or left hand holder for the
glass cover.
When doing this, push the glass
cover upwards so that it does not fall
on the hob surface.
Take off the glass cover holder.
Take out the glass cover, guiding it
downwards at an angle.
When changing the light tube also
unscrew the second glass cover
holder.
Cleaning and Care
Replace the light tube or the starter.
Put the glass cover back into place
and secure with the glass cover
holders.
13