Defrosting - Miele KT 3534 Sed Operating And Installation Manual

Defrosting

Condensate and frost can build up on
the back wall of the refrigerator section
whilst it is in use. These are automati-
cally removed and defrosted by the ma-
chine.
The condensate is drained away via a
channel and drain hole into an evapo-
ration system at the back of the
appliance.
Ensure that the condensate channel
and drain hole are never blocked so
that the condensate can flow away
without hinderance.
The freezer section does not defrost
automatically because frozen food
must not be allowed to defrost.
In normal use ice and frost will form on
the evaporator plate. If allowed to accu-
mulate, this will impair the efficiency of
the freezer and increase the consump-
tion of electricity.
Do not scrape ice and frost off the
evaporator plate as this can dam-
age the evaporator plate and the
freezer section making it unusable.
The freezer section should be de-
frosted from time to time. It must be de-
frosted if a layer of ice approx. 5 mm
thick has accumulated. It is best to de-
frost when only very little food or no
food at all is left in the freezer.
Remove the frozen food from the
freezer section and place it in an-
other freezer or cool box or wrap it in
several layers of newspaper or
cloths and place it in a cool place
until the freezer section is ready for
use again.
19