Miele T 8622 C Operating Instructions Manual page 37

Problem
The programme does
not start and the display
is dark.
The interior drum
lighting does not come
on.
The display is in a
different language.
The Start/Stop button
indicator light flashes
when a programme is
being selected.
The display is dark.
The programme selector
is not lit up.
The Start/Stop button
indicator light flashes
slowly.
Possible cause
No obvious cause.
The lighting switches off
automatically (to save
energy).
The lamp needs
changing.
A different language has
been selected.
This is not a fault.
The flashing indicates that
a programme can be
started.
The display and
programme selector
lighting have switched off
automatically to save
energy (Standby mode).
If the problem persists,
there is a fault.
Problem solving guide
Remedy
– Is the dryer switched
on?
– Is the plug correctly
inserted into the socket
and switched on?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
Switch the dryer off and
then on again.
Change the lamp as
described at the end of
this section.
Set the language you
want. The flag symbol J
will guide you. See
Language J at the end of
this booklet.
After the programme has
started, the flashing will
change to a constant
light.
The display and the
programme selector will
light up when one of the
buttons is pressed.
Contact the Miele Service
Department.
37