Miele T 4882 C Operating Instructions Manual page 34

Clean fluff filters
,
TECHNICAL FAULT!
34
The dryer is not
working efficiently or
economically.
Possible causes: The
fluff filters are
clogged with fluff or
with detergent
residues.
You can adjust the
setting which controls
when or if the
message Clean fluff
filters appears.
No obvious cause.
In some
circumstances, Clean
fluff filters will already
have been displayed.
There is a fault, if
despite doing this,
the programme is
cancelled and the
fault message
appears again.
– Clean the fluff filters.
If they need to be cleaned
with water, make sure they are
completely dry before
replacing them.
– See also the notes on the next
page under: The drying
process goes on too long or
even switches off.
To delete the fault message:
– Switch the dryer off and then
back on again.
See Settings menu J, Airways
indicator section.
– Clean the fluff filters and the
condenser unit.
To delete the fault message:
– Switch the dryer off and then
back on again.
Contact the Miele Service
Department.